Inspection of a CTA-10 vessel (PPC-17.6) intended for storing liquefied propane and butane, with an operating volume of 17.6 m³ and a pressure of 1.6 MPa.

Technical diagnostics of the steel structure of a 120/20 t electric overhead crane

Inspection of a Category IV steam pipeline with a total length of 200m, an operating temperature of +190°C and a pressure of 1.25MPa.

Inspection of a TM-400/10 oil-immersed power transformer, rated 10/0.4 kV, at the ZTP-517 indoor transformer substation.

Inspection of a KOLVI-300 hot-water boiler with a thermal output of 349 kW and a pressure of 0.5 MPa.

Inspection of a CPCD20N-RW15A forklift truck with a lifting capacity of 2,000 kg.

Inspection of a P500.11.24 air receiver with an operating volume of 0.5 m³ and a pressure of 1.1 MPa.

Inspection of a T32002X hydraulic shop crane with a lifting capacity of 2.0 t.

Technical inspection of a LIBERTY L-6106A mobile scissor lift with a lifting capacity of 3,000 kg.

Technical inspection of a PP-250 lifting platform for persons with disabilities, with a lifting capacity of 250 kg and a lifting height of 1.5 m.

Inspection of a POZH INKA-100 heating furnace with a thermal output of 100 kW and a pressure of 0.06 MPa.

Technical inspection of a V-2 air receiver with an operating volume of 2 m³ and a pressure of 0.8 MPa.

Technical inspection of a 1.0 t single-girder underslung electric overhead crane.

Inspection of an AP12-3.6 × 27 autoclave with an operating volume of 293 m³, a pressure of 1.2 MPa and an operating temperature of +191 °C.

Inspection of an AT16-2×19 autoclave with an operating volume of 62 m³, a pressure of 1.6 MPa and an operating temperature of +203 °C.

Inspection of a Linde L14 stacker with a lifting capacity of 1,400 kg.

Inspection of a Kva-300G gas-fired hot-water boiler with a thermal output of 300 kW and a pressure of 0.6 MPa.

Dismantling of a QTZ 100 tower crane with a lifting capacity of 8.0 t, a lifting height of 38 m and a jib radius of 50 m.

Laboratory and instrumental studies of the microclimate, noise, physical demands and intensity of work, and workplace air for certification of a powder-coating painter’s workstation.

Inspection of the mechanisms and electrical equipment of a 10 t overhead crane before repair work.

Technical inspection of an AVTR-AJ24 vehicle-mounted hydraulic work platform with a lifting capacity of 220 kg, a working height of 24 m and an outreach of 12.5 m, mounted on a JAC N721-N90 vehicle.

Levelling of a 120 m crane runway for a single-girder overhead crane with a span of 28.5 m.

Expert examination (technical diagnostics) of a KTA-25 truck crane with a lifting capacity of 25 t, a lifting height of 10 m and an outreach of 8 m.

Repair of the safety devices of a RUTHMANN K-95 hydraulic lift mounted on a GAZ 33104-318 vehicle, with a lifting capacity of 200 kg, a lifting height of 11 m and an outreach of 7 m.